Triplex Electric has served Fountain Valley homeowners and businesses since 1999, and in that time we have handled everything from a single dead outlet to full-service panel upgrades and commercial rewires. Whether you need a same-day repair or a planned installation, we are ready to help. Our work travels by word of mouth here, so we earn it every time. Safe wiring. Solid workmanship. Straight answers.
Call (657) 551-4465 for a quote.
Most homeowners can't tell a minor wiring issue from a serious one, and that uncertainty is exactly why getting a fast, honest diagnosis matters. A dead outlet might be a tripped GFCI. Flickering lights might be a loose connection or a failing breaker. A burning smell or a sparking outlet, though, can signal a hazard that needs attention right away.
We troubleshoot the full range of common electrical complaints: outlets that stopped working, breakers that keep tripping, half the house losing power, and anything that looks or smells wrong. Our electricians check for GFCI and AFCI protection where code requires it and make sure any repair brings the circuit up to current standards, not just back to working.
We keep you informed from diagnosis to final test, so you always know what we found and what we did. Call us and we'll walk you through the fix.
If you're not sure your panel can handle the load, that is a question worth answering before you add a new circuit, a major appliance, or an EV charger. Older panels running 100 amps were built for a simpler time. Today's homes and businesses routinely need 200-amp service, and some properties need more.
We handle panel repair, panel replacement, and service upgrades from 100 amps to 200 amps and beyond. If the home still has a fuse box, we convert it to a modern breaker panel. If the service entrance needs upgrading to support new loads, we do that work too.
Older Orange County homes sometimes have knob-and-tube or aluminum wiring that needs evaluation and, in many cases, replacement. We assess what is there and recommend the right path forward, whether that is a targeted repair or a full rewiring. We show up on time and ready to wire. We'll get the job wired and finished.
Good electrical installation is invisible when it is done right. The outlet works, the light comes on, the switch does exactly what it should. We install and replace outlets, switches, and lighting throughout Fountain Valley residences and commercial properties, and we wire everything to code.
We install GFCI outlets in kitchens, bathrooms, garages, and outdoor areas where code requires them, and AFCI protection in bedrooms and living spaces. USB outlets are a practical upgrade in any room. On the switch side, we install dimmer switches, smart switches, and standard replacements. If a switch is failing, buzzing, or just in the wrong location, we handle it.
Lighting work covers a wide range. Inside, we install recessed and LED lighting, pendant lights, chandeliers, and under-cabinet lighting. Ceiling fan installation and wiring is one of the most common requests we get, and we handle both new installs and replacements. Outside, we install landscape lighting, security lighting, and motion sensor lights that actually cover the right zones. Prompt response, even for last-minute electrical calls, means you are not waiting around when you need work scheduled. One ring and we're on it.
Southern California leads the country in EV adoption and rooftop solar, and the Orange County grid is no stranger to variability, including public-safety power shutoffs during wildfire season. These three services come up constantly in this area, and we are set up to handle all of them.
A Level 2 EV charger at home is the practical choice for anyone driving an electric vehicle in Fountain Valley. It charges overnight, it is compatible with Tesla and every other major EV brand, and it adds real convenience compared to a standard 120-volt outlet. Before we install, we check panel capacity and run a dedicated circuit sized for the charger. If the panel needs an upgrade to support the load, we handle that in the same visit or schedule it alongside the charger work.
Solar panels are everywhere in Orange County, and battery storage systems are becoming just as common. We handle the electrical side of these installations: the dedicated circuits, the wiring from the system to the panel, and any panel upgrades needed to support the added load. When a public-safety shutoff hits or the grid goes down, a properly wired battery backup system keeps critical circuits running. We make sure the electrical infrastructure is solid so the system can do its job.
A whole-home surge protector installs at the main panel and shields every circuit in the house from voltage spikes caused by grid fluctuations, nearby lightning, or utility switching events. In an area with high electronics density and a grid that sees real stress during peak demand and weather events, a panel-level surge protector is straightforward insurance for appliances, computers, and anything else plugged in.
Our electricians know the homes and wiring in this area, and that local familiarity makes a real difference when the job involves older wiring, unusual panel configurations, or equipment that needs a circuit sized exactly right.
Dedicated circuits are often the right answer for high-draw appliances. We install dryer outlets, oven and range circuits, and 240-volt outlets for major equipment. Hot tub and pool wiring requires its own careful approach, and we handle both with the proper disconnect and GFCI protection the job requires.
For generator work, we install transfer switches for both standby and portable generators, and we run the wiring that connects the generator to the home's electrical system safely. A properly installed transfer switch means you can run essential circuits during an outage without any risk of backfeeding the utility line.
Electrical safety inspections are useful for older homes, properties changing hands, and any situation where the wiring history is unclear. We check the panel, the circuits, and the visible wiring, identify any code violations, and give you a clear picture of what needs attention. We also install smoke detectors and carbon monoxide detectors as part of a complete safety check. Call today and we'll get the power back where it belongs.
When the power goes out, or something stops working in a commercial space, the clock is running. Downtime costs money, and tenants and customers notice. We work with property managers, business owners, and contractors throughout Orange County on commercial electrical repair, wiring, and installation.
Our commercial work covers office and retail electrical, tenant improvement wiring, new construction rough-in, and ongoing repair and maintenance for commercial properties. Work is performed by licensed electricians who understand commercial code requirements and the expectations that come with a business environment. We keep the project moving and communicate clearly so you are not left guessing about timelines or scope.
Fountain Valley is our home base, and we serve the surrounding area across Orange County. If you are in Huntington Beach, Costa Mesa, Santa Ana, Westminster, Garden Grove, Midway City, or Stanton, we are close by and ready to schedule. Whether the job is a quick repair or a larger installation, we cover the area and show up prepared to work.
Call us at (657) 551-4465 and tell us what you are dealing with. We will ask a few questions about the issue or project, give you a clear estimate, and get you on the schedule.
We offer same-day scheduling for urgent situations and respond promptly to last-minute calls throughout Fountain Valley and Orange County. For planned projects, we work around your availability and can typically get you on the schedule within a day or two.
Stop using the outlet or switch immediately and, if it is safe to do so, turn off the breaker that feeds it. Do not attempt to open the panel or the outlet yourself. Call us at (657) 551-4465 so we can get someone out to diagnose and resolve the hazard.
Yes. Many homes in this area were built or last updated decades ago, and we are experienced with older wiring configurations, including knob-and-tube and aluminum branch wiring. We assess what is in place, explain the options, and recommend the right path forward.
All work we perform is held to current electrical code, and we pull permits and coordinate inspections when the job requires them. Licensed electricians perform every job, and we do a final test before we leave to confirm everything is working correctly.
Yes. We are available every day from 5:00 AM to 9:30 PM, including weekends. If you cannot take time off during a standard workday, we can find a time that works for your schedule.
It helps to make sure the panel is accessible and that the areas where we will be working are reasonably clear. If you are not sure what to prepare, let us know when you call and we will tell you exactly what we need.
A brief description of what you are seeing or hearing is enough to get started. Note which room or circuit is affected, whether the problem is constant or intermittent, and whether anything happened just before it started. That information helps us arrive prepared.
We give you a clear estimate before any work begins. If something unexpected comes up once we are on-site, we stop and explain it before we proceed. You know what you are agreeing to before we pick up a tool.
For larger projects such as full panel replacements, service upgrades, or whole-home rewiring, we may ask for a deposit to cover materials. We will be upfront about that when we provide the estimate so there are no surprises.
Payment is due when the job is complete. For larger multi-day projects, we will discuss the payment schedule with you in advance so you know what to expect at each stage.
Simple booking. Clear pricing. Safe, solid wiring.
We are available for same-day appointments and after-hours calls, including weekends and urgent situations. When something goes wrong with the wiring in your home or business, you should not have to wait days to get someone out.
Call (657) 551-4465 to request an estimate or schedule a service call. Triplex Electric has been handling electrical work in Fountain Valley since 1999, and we are ready to put that experience to work for you.
From a single tripped breaker to a full service upgrade, we handle the electrical work that keeps Fountain Valley homes and businesses running safely. Below is a plain-language look at what each service covers, who it fits best, and what is worth knowing before you call. If you have questions about a specific job, we are happy to walk you through it.
| Service Type | What's Included | Ideal For | Things to Know |
|---|---|---|---|
| Electrical Safety Inspections | panel and circuit evaluation, code violation identification, smoke and CO detector installation, wiring condition assessment | older homes, properties changing hands, or any situation where the wiring history is unclear | We check the panel, visible wiring, and circuits, then give you a plain-language report of what we found and what, if anything, needs attention. |
| Outlet & Switch Installation | GFCI and AFCI outlets, USB outlets, dimmer and smart switches, outdoor and garage outlets | homeowners updating older outlets, adding USB charging, or bringing kitchens and bathrooms up to current code | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor areas. If your outlets in those spaces are not GFCI-protected, we can bring them up to standard. |
| Electrical Panel & Service UpgradesMost Popular | 100-amp to 200-amp upgrades, panel replacement, service entrance work, fuse-to-breaker conversion | homes adding an EV charger, major appliance, or solar system, or any property still running on a 100-amp or fuse-based panel | Most older Orange County homes were built with 100-amp service. Today's loads routinely require 200 amps or more. We pull permits and coordinate inspections on every upgrade. |
| Ceiling Fan Installation | new fan installs, fan and light combo wiring, replacement of existing fans, switch and remote wiring | homeowners adding comfort and air circulation without raising the electric bill | Ceiling fans require a properly rated junction box. Older boxes rated only for light fixtures need to be replaced before a fan goes up. We check that as part of every install. |
| EV Charger Installation | Level 2 charger wiring, dedicated circuit installation, panel capacity check, compatibility with all major EV brands | Fountain Valley EV drivers who want reliable overnight charging at home instead of relying on a standard 120-volt outlet | Southern California leads the country in EV adoption, and a Level 2 charger is the practical choice for daily use. We check panel capacity first and handle any needed upgrade in the same visit. |
| Wiring & Circuit Installation | new circuit runs, home additions and remodels, older-home rewiring, knob-and-tube and aluminum wiring | homes being remodeled, homes with outdated wiring, or any property where the existing wiring cannot safely support current demand | Knob-and-tube and aluminum branch wiring are common in older Orange County homes. We assess what is in place and explain the options before recommending a repair or full rewire. |
| Breaker & Fuse Repair | breakers that trip repeatedly, fuse box evaluation, failed or weak breakers, circuit restoration | homes with an older panel or a breaker that will not stay reset | A breaker that trips often is telling you something. It may be an overloaded circuit, a failing breaker, or a wiring fault worth finding before it becomes a hazard. |
| Lighting Installation | recessed and LED lighting, pendant and chandelier wiring, security and motion sensor lights, landscape and outdoor lighting | any room or outdoor area where lighting needs to be added, replaced, or upgraded | Outdoor security lighting and landscape lighting both require weatherproof wiring and proper circuit protection. We handle both interior and exterior installs to code. |
| Dedicated Appliance Circuits | dryer and range circuits, 240-volt outlets, workshop and garage circuits, hot-tub and pool wiring | homeowners adding a major appliance, a hot tub, or a workshop that needs its own dedicated power supply | Hot-tub and pool circuits require a specific disconnect and GFCI protection under code. We handle both with the proper equipment and a permit when required. |
| Electrical Repairs & Troubleshooting | dead outlets and switches, flickering or dimming lights, burning smells or sparking, GFCI and AFCI checks | any homeowner or business owner noticing something wrong with a circuit or outlet | A symptom that seems minor can point to a larger wiring issue. Getting a diagnosis early is almost always less costly than waiting. |
| Whole-Home Surge Protection | panel-level surge protector installation, protection for all circuits, defense against grid fluctuations, lightning and utility event coverage | any home with computers, smart devices, or appliances worth protecting from voltage spikes | A panel-mounted surge protector shields every outlet in the house from spikes caused by grid switching, nearby lightning, or peak-demand events common in Orange County. |
| Standby Battery & Generator Hookups | transfer switch installation, portable and standby generator wiring, essential circuit connections, safe utility isolation | homeowners who want reliable backup power during outages without the risk of backfeeding the utility line | A properly installed transfer switch is required for safe generator use. It isolates your home from the utility line so the generator runs only what it should, safely. |
| Solar & Battery Backup | solar system electrical wiring, battery storage circuit work, panel upgrades for added load, critical circuit wiring for outages | homeowners with rooftop solar or battery storage who need the electrical infrastructure wired correctly from panel to system | We handle the electrical side of solar and battery installations: circuits, panel connections, and any upgrades the added load requires. When public-safety shutoffs hit, a properly wired battery system keeps critical circuits running. |
How do I know if my panel needs an upgrade?
A few signs point in that direction: breakers that trip often, a fuse box still in service, lights that dim when an appliance kicks on, or a panel that feels warm to the touch. If you are planning to add an EV charger, a major appliance, or a solar system, we check panel capacity first. A 100-amp panel that was standard decades ago often cannot carry today's loads safely.
What causes a breaker to keep tripping?
The most common causes are an overloaded circuit, a failing breaker, or a wiring fault somewhere in the circuit. Occasionally it is as simple as too many high-draw devices on one circuit. We troubleshoot the cause rather than just resetting the breaker, because a breaker that trips repeatedly is usually signaling a real problem.
Is the work permitted and inspected?
Yes. We pull permits and coordinate inspections for any job that requires them under local code. Work performed by licensed electricians is held to current electrical standards, and we do a final test before we leave to confirm everything is operating correctly.
Same-Day and Emergency Availability
We are available every day, including weekends, and we respond promptly to urgent calls. When something goes wrong with your wiring, you should not have to wait days to get someone out.
Is the wiring in an older Fountain Valley home safe?
It depends on what is there and how it has been maintained. Many homes in this area were built or last updated decades ago and may have knob-and-tube wiring, aluminum branch wiring, or undersized panels. We assess what is in place, explain what we find, and recommend the right path forward, whether that is a targeted repair or a more complete update.
What do flickering or dimming lights usually mean?
Occasional flickering when a large appliance starts up can be normal, but persistent dimming or flickering often points to a loose connection, a failing breaker, or a panel that is struggling with the load. If lights dim throughout the house rather than in one room, that is worth having us look at sooner rather than later.
What does an EV charger installation involve?
We start by checking your panel capacity and the available space for a new breaker. Then we run a dedicated circuit from the panel to the charger location, install the charger, and test the connection. If the panel needs an upgrade to support the added load, we handle that as part of the same project. A Level 2 charger works with Tesla and every other major EV brand.
Work Performed by Licensed Electricians
Every job is handled by licensed electricians who understand current code requirements and what it takes to leave a job wired correctly. We do a final test before we leave so you know the work is done right.
When should I call an electrician instead of trying to fix it myself?
Any time the issue involves the panel, the wiring inside walls, an outlet that is warm or buzzing, or anything that smells like burning, call us. Replacing a light bulb or resetting a tripped breaker is reasonable to do yourself. Opening an outlet, working at the panel, or running new wiring is work for licensed electricians. The risk of getting it wrong is not worth it.
Can I get same-day service for an urgent electrical problem?
Yes. We offer same-day scheduling for urgent situations and respond promptly to last-minute calls throughout Fountain Valley and the surrounding area. If something looks or smells wrong, do not wait. Call us and we will get someone out.
Upfront Quotes With No Surprise Fees
We give you a clear estimate before any work begins. If something unexpected comes up on-site, we explain it before we proceed. You decide before we pick up a tool.
How does pricing work, and will the estimate change once you arrive?
We give you a clear estimate before any work begins. If something unexpected comes up once we are on-site, we stop and explain it before we proceed. You know what you are agreeing to before we pick up a tool. For larger projects, we discuss payment expectations upfront so there are no surprises.
What is whole-home surge protection, and do I need it?
A whole-home surge protector installs at the main panel and shields every circuit in the house from voltage spikes. In Orange County, where the grid sees real stress during peak demand and public-safety shutoff events, a panel-level protector is practical coverage for computers, smart home devices, and major appliances. It is a one-time install that works quietly in the background.
How long does a panel upgrade typically take?
Most panel upgrades are completed in a single day. The work involves shutting off power to the home for a portion of the job, so we coordinate with you in advance on timing. Larger service entrance upgrades or jobs that require utility coordination may take longer, and we will tell you what to expect when we provide the estimate.
Call (657) 551-4465 to get a straight answer on what your job involves and schedule a time that works for you.
(657) 551-4465